打印本文 关闭窗口 | |
6509 NAT 示例 | |
作者:佚名 文章来源:不详 点击数1074 更新时间:2007-5-18 3:15:01 文章录入:啊祖 责任编辑:啊祖 | |
|
|
begin ! # ***** ALL (DEFAULT and NON-DEFAULT) CONFIGURATION ***** ! ! #time: Sun Oct 21 2001, 21:36:49 ! #version 6.2(2) ! set password $2$FMFQ$HfZR5DUszVHIRhrz4h6V70 set enablepass $2$FMFQ$HfZR5DUszVHIRhrz4h6V70 set prompt Console> set length 24 default set logout 20 set config mode binary set banner motd ^C^C ! #test set test diaglevel minimal ! #errordetection set errordetection inband disable set errordetection memory disable set errordetection portcounter enable ! #system set system baud 9600 set system modem disable set system name set system location set system contact set system countrycode set traffic monitor 100 set system highavailability disable set system highavailability versioning disable set system core-dump disable set system core-file slot0:crashinfo set feature log-command enable set feature supmon enable ! #power set power redundancy enable ! #frame distribution method set port channel all distribution ip both ! #mac address reduction set spantree macreduction disable ! #default portcost mode set spantree defaultcostmode short ! #snmp set snmp community read-only public set snmp community read-write private set snmp community read-write-all secret set snmp rmon disable set snmp rmonmemory 85 set snmp trap disable module set snmp trap disable chassis set snmp trap disable bridge set snmp trap disable repeater set snmp trap disable vtp set snmp trap disable auth set snmp trap disable ippermit set snmp trap disable vmps set snmp trap disable entity |
|
打印本文 关闭窗口 |